Arexons 0099 Black Silicone Gasket Silicone Gasket, Black, 200 ml
BLACK SILICONE GASKET AREXONS - BLACK SILICON GASKET
PROPERTY'
• It is resistant to oil, transmission fluids, water, petrol, antifreeze, grease, to
smoke and hot toxic gases.
• Replaces cork, felt, paper and rubber seals.
• Withstands low temperatures down to -40 ° C (constant) and high temperatures up to 260 ° C
(constant) and 300 ° C (intermittent).
• Does not damage catalytic converters and electric sensors.
• No mixture (single component) is required.
APPLICATIONS
• Ideal for replacing gaskets and gaskets of engine components
(cylinder head cover, oil and transmission crankcase, water pumps,
thermostats), heating installations, A / C, bodywork, industrial ovens, cooking stoves,
window seals and many other applications.
• The product is not suitable for replacing head gaskets or applications that require them
the immersion continues in gasoline.
• Do not use in joints deeper than 10 millimeters.
• Avoid contact with solvent cleaners
INSTRUCTIONS FOR USE
• Remove the protection.
• Cut the nozzle in the required angle and width.
• Remove the tab from the flow control valve.
• Make sure the surfaces are clean and dry and grease to taste.
• Place the nozzle at the beginning of the seal to be filled. Apply Gasket Maker with a light one
pressure on the trigger.
• After use, dry the nozzle and replace the guard.
• If the application requires the components to be dismantled after the gasket has been made,
apply Gasket Maker normally, but apply a light layer of oil on the opposite side to the
gasket before joining the two surfaces.
TECHNICAL SPECIFICATIONS
Appearance: Black paste
Density: 1.08
Temperature resistance: -40 to + 260 ° C (over 300 ° C for short exposures)
Average application temperature: +5 to + 40 ° C