Shell Gadus S2 V220 are multifunctional greases for extreme pressures based on a high viscosity mineral oil and a new lithium soap, it contains a specific additive for extreme pressures and an accurate selection of additives that improve performance in a wide field of applications. Shell Gadus S2 V220 are developed for the general lubrication of ball and plane bearings, hinges and sliding surfaces typical of industrial applications and of the transport sector
Superior resistance to loads Shell Gadus S2 V220 contains special anti-wear additives that allow the grease to withstand high and impact loads without the lubricating film being interrupted. Excellent mechanical stability. It is particularly important in applications subjected to vibrations where a poor mechanical stability would lead to the softening of the grease and consequent loss of lubricating capacity and leakage. Good washout resistance Shell Gadus S2 V220 greases have been formulated to offer good resistance to oxidative tab wash out. The special selection of the base oil components has allowed us to obtain excellent oxidative resistance. The consistency does not change during storage and the grease is able to withstand high operating temperatures without hardening and without forming deposits on the bearings. Anti-corrosion protection Shell Gadus S2 V220 greases have an affinity for metals and have the ability to protect bearing surfaces from corrosion, even where grease is contaminated by water.
Attached Technical Sheet