Arexons Additive Cleaner FAP / DPF 325ml Diesel Engines Particulate filter
ADDITIVE FAP / DPF contributes to the reduction of particulate matter (pm 10) and carbon deposits by keeping the FAF / DPF particulate filter clean and efficient for longer.
This performance is due to the new technology adopted which allows for a quick cleaning of the fuel system, improved ignition speed and increased lubrication. The additive also combats the formation of foam during refueling and facilitates the separation of the water which will then be retained by the fuel filter.
Extends maintenance intervals of the FAP and DPF particulate filter, reducing regeneration cycles
Extreme cleaning with a single treatment with one full tank of fuel. XUD-9 and CEC DW 10 tests
Quick cleaning of the deposits on the injectors
Increase the cetane number by approx. 5 CN *
Optimize the combustion process
Reduces emissions of harmful substances by optimizing the opacity values of the exhaust gases
Returns the original power of the engine
Prevents foaming during refueling
Contributes to the fuel economy? (reduced fuel consumption)
Compatible with biodiesel currently in distribution *
The average increase of 5 CN (to the recommended dosage) results in the reduction of the particulate matter, the improvement in cold starts, the reduction in noise and a greater operating elasticity of the engine.
FIELDS OF USE
Suitable for all types of diesel engines, including DI, IDI and Common Rail systems.
Density at 15 ° C ASTM D1298 0.905g / ml
Viscosity at 40 ° C 9.5 mm2 / s
METHOD OF USE
Add directly into the tank. Repeat the treatment every 10,000 km or at each programmed coupon.
325ml are recommended to treat 40 ÷ 50 lt of diesel.